Protelack SFP

• PROTELACK SFP and PROTELACK SFP FAST coatings have been tested in accordance with EN 13381-8 for resistance to a standard (cellulosic) fire for up to 120 minutes.
• When applied, the coating increases the fire resistance of steel structures – open profiles up to 120 minutes and closed sections of steel beams and columns up to 90 minutes.

PROTELACK SFP and PROTELACK SFP FAST coatings are classified as C-s2, d0 according to EN 13501-1 for metal structures.

CE marking confirms that the product complies with EU construction product regulations under Regulation No. 305/2011 and EAD 350402-00-1106 “Reactive fire-protective coatings for steel elements.” The product holds a Declaration of Performance based on ETA 24/1185 issued by the Eduardo Torroja Institute for Construction Science.

For steel elements exposed outdoors or in interiors with high humidity or condensation, two coats of the hard polyurethane topcoat (Protefilm T) are required before the intumescent coating is exposed to such conditions. Minimum dry film thickness: 120 µm.

Proper surface preparation is essential – the primer must adhere well, be clean, dry, and free from contamination.

• PROTELACK SFP
  Air temperature: 5–45 ºC
  Relative humidity: < 85%
• PROTELACK SFP FAST
  Air temperature: 5–25 ºC
  Relative humidity: < 85%
• Substrate temperature: not lower than 5 °C and at least 3 °C above the dew point.

The PROTELACK SFP fire-protective coating is part of the PROTELACK SFP system.

• Primer coatings
  PRIMELACK B, PRIMELACK S
• Intumescent coatings
  PROTELACK SFP, PROTELACK SFP FAST
• Top coatings
  PROTEFILM T